Surfcam Traditional 2020 Operations Manager


Results 1 to 1 of 1

Thread: Surfcam Traditional 2020 Operations Manager

  1. #1
    Member lavvylav349mmc's Avatar
    Join Date
    Jun 2020
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Surfcam Traditional 2020 Operations Manager

    Can anyone tell me how to prevent the Operations Manager from closing everytime a toolpath is regenerated? Needless to say, very annoying and many many many unnecessary mouse clicks.

    I'm new to Surfcam, but it sure seems like there should be a workaround to this problem by now.

    Thank You!

    by the way ...

    under Tools, Options, NC Defaults, Operation Manager, I already have all the boxes unchecked for ' Close Operation Manager'

    Similar Threads:
    Last edited by lavvylav349mmc; 08-18-2020 at 09:20 AM.


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Surfcam Traditional 2020 Operations Manager

Surfcam Traditional 2020 Operations Manager