- Surfcam Display Tool as 2D Circle
-
Member
Surfcam Display Tool as 2D Circle
Trying to display tool as 2D Circle by changing setting :
Surfcam 2020.1 > Tools > Options > Display > Toolpath > Display Tool > 2D Circles
but not having any luck retaining this parameter, or seeing the resultant 2D Circle when the toolpath is displayed.
Thank You!
Similar Threads:
-
-
Member
Re: Surfcam Display Tool as 2D Circle
You can use the TAB key during backplot and it will change the Tool Display from Shaded, 3D Wireframe, 2D
Darin
- Surfcam Display Tool as 2D Circle
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules