Getting CSYS data from Surfcam


Results 1 to 2 of 2

Thread: Getting CSYS data from Surfcam

  1. #1
    Member
    Join Date
    May 2012
    Location
    Sweden
    Posts
    100
    Downloads
    0
    Uploads
    0

    Default Getting CSYS data from Surfcam

    Is it possible to make a Posthaste post for Surfcam, (Postform) that takes the Ccys data from a 4-axis operation and
    puts all the offsets values G54-59 (however many offsets used in the file) automatically with the right values, from the machine zero in B-center?

    This can be done with advanced post processors with other cam systems, like Gibbscam and Mastercam. Probably with Surfcam to, but
    i wonder if it can be done with Posthaste. Buying a postprocessor is not an option, to expensive. We have no license anymore.

    Similar Threads:


  2. #2
    Member
    Join Date
    Feb 2006
    Location
    usa
    Posts
    45
    Downloads
    0
    Uploads
    0

    Default Re: Getting CSYS data from Surfcam

    yes it can you need to mod the post in both the tool change area and the between area. you can do g54 or g54.1p1 2 3 4 5 99 etc
    .



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Getting CSYS data from Surfcam

Getting CSYS data from Surfcam