Latest Surfcam


Results 1 to 4 of 4

Thread: Latest Surfcam

  1. #1
    Member
    Join Date
    May 2013
    Location
    US
    Posts
    139
    Downloads
    0
    Uploads
    0

    Default Latest Surfcam

    Anyone using the latest version of Surfcam? We currently have 2015 R2 and we are wondering if some issues have been addressed yet.

    Similar Threads:


  2. #2
    Member forjaco's Avatar
    Join Date
    Feb 2012
    Location
    Portugal
    Posts
    116
    Downloads
    0
    Uploads
    0

    Default Re: Latest Surfcam

    I have the latest version, 2019R1 SU1, and it's have some issues...



  3. #3
    Member
    Join Date
    May 2013
    Location
    US
    Posts
    139
    Downloads
    0
    Uploads
    0

    Default Re: Latest Surfcam

    One of the issues our programmer is currently having is opening a file with a long name. I don't know exactly how many characters but sometimes it just refuses to open the file (Surfcam crash) or it just sits there and does nothing for 5 minutes. Just wondering if things like that are fixed or if we should go with what we replaced Surfcam with for the other programmers.



  4. #4
    Member
    Join Date
    Jan 2012
    Location
    USA
    Posts
    84
    Downloads
    0
    Uploads
    0

    Default Re: Latest Surfcam

    I think that the long filename issue was fixed some time ago. I use 2018 R2 and it seems to be very stable. I installed 2019 R1 and it does appear to have a few issues, so I went back to 2018... I think if you have 2015 then you're missing out on some useful updates, though I don't remember specifically, because I have CRS..!



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Latest Surfcam

Latest Surfcam