4 Axis post for Haas control


Results 1 to 3 of 3

Thread: 4 Axis post for Haas control

  1. #1
    DanWarner's Avatar
    Join Date
    Jul 2018
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default 4 Axis post for Haas control

    Looking for a good full 4th axis post that will do simple X & A movement as well as full 4th axis surfacing. Vero support will build one of course, but at a premium. Generic posts are not great and have problems. Anyone have one they are willing to share or know where to find one?



  2. #2
    Registered
    Join Date
    Jul 2014
    Posts
    16
    Downloads
    0
    Uploads
    0

    Default Re: 4 Axis post for Haas control

    I Would be interested in this as well, they sell you the software with all the posts jacked up, i've done some simple editing on mpost.
    but the spost is suppose to work a lot smoother i hear. but not easy to edit



  3. #3
    Registered PRac's Avatar
    Join Date
    Dec 2016
    Location
    Baranowo
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: 4 Axis post for Haas control

    Contact me via PM



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

4 Axis post for Haas control

4 Axis post for Haas control