Need help with this Lathe Program


Results 1 to 3 of 3

Thread: Need help with this Lathe Program

  1. #1
    Registered
    Join Date
    Oct 2012
    Location
    United States
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Need help with this Lathe Program


    Is it correct?

    %
    o12345
    G0 G54
    G90
    T0101
    G97 S500 M3
    G96 S200
    G50 S2500
    M8
    G0 X-2.600 Z0.0
    G1 X.400 Z0.0 F.01
    X.500 -.50
    Z-.700
    X.775
    X.875 Z-.750
    Z-1.700
    X1.9
    X2.0 Z-1.750
    Z-2.200
    X2.400 Z-2.250
    Z-3.325
    G0 X3.5

    M30
    %

    Similar Threads:


  2. #2
    Member ChrisW's Avatar
    Join Date
    May 2003
    Location
    Lake In The Hills
    Posts
    323
    Downloads
    0
    Uploads
    0

    Default Prog

    Here you go

    G0 X.7 Z.05
    G50 S3000
    G96 S1000
    X0.
    G99 G1 Z0. F.01
    X.4
    X.5 Z-.05
    Z-.75
    X.775
    X.875 Z-.8
    Z-1.75
    X1.9
    X2. Z-1.8
    Z-2.25
    X2.9
    X3. Z-2.3
    Z-3.375
    X3.12
    G0 X3.7

    Last edited by ChrisW; 10-17-2012 at 12:46 PM. Reason: correction


  3. #3
    Registered
    Join Date
    Oct 2005
    Location
    United States
    Posts
    118
    Downloads
    0
    Uploads
    0

    Default

    Do you still need help? There is a host of things that I would change to make both programs safer. If you could send a pic or print of what you are trying to make I could give a few pointers.


    Janos



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Need help with this Lathe Program

Need help with this Lathe Program