New Machine Build Stirling engine pressurized and water-cooled

Results 1 to 6 of 6

Thread: Stirling engine pressurized and water-cooled

  1. #1
    Registered
    Join Date
    Feb 2011
    Location
    France
    Posts
    8
    Downloads
    0
    Uploads
    0

    Default Stirling engine pressurized and water-cooled

    Hello,

    This is my new engine based on one I have built last year. I have modify it to make it pressurized and water-cooled.

    Here is a video of the first tests and assembly.

    http://www.youtube.com/watch?v=hTJvUXD8_h8&list=UUbRpiLu8jujmNDsPg1eqOlw&index=1&feature=plcp]Moteur Stirling alpha préssurisé refroidi par eau - YouTube

    Stirling engine pressurized and water-cooled-moteur-pressuris-assembl-006-jpg

    Stirling engine pressurized and water-cooled-moteur-pressuris-assembl-005-jpg

    Stirling engine pressurized and water-cooled-moteur-pressuris-assemblage-009-jpg

    Bye

    Similar Threads:


  2. #2
    Member
    Join Date
    Dec 2004
    Location
    usa
    Posts
    1858
    Downloads
    0
    Uploads
    0

    Thumbs up TRES BIEN!!!!

    Bonjour Chris,
    It looks and sounds very nice. I am hoping to build something like that when I have the time.

    Mike

    P.S. Haven't used high school French in a few decades. LOL

    Warning: DIY CNC may cause extreme hair loss due to you pulling your hair out.


  3. #3
    Registered
    Join Date
    Feb 2011
    Location
    France
    Posts
    8
    Downloads
    0
    Uploads
    0

    Default

    Hello Mike,

    Thank yous. Yes you're right, I should have put a version in English.
    It will be done on the next video.

    It turn well, but not as well I want. It is hard to find the good settings. I have to make a regenerator and I hope it will increase the performance.

    bye

    Chris



  4. #4
    Registered
    Join Date
    Nov 2011
    Location
    South Africa
    Posts
    8
    Downloads
    0
    Uploads
    0

    Default

    Hi Chris

    That is a masterpiece, I hope to be able to build a project that works let alone one of such perfection. You are too modest.

    Well Done

    Colin



  5. #5
    Registered
    Join Date
    Oct 2010
    Location
    U.S.
    Posts
    7
    Downloads
    0
    Uploads
    0

    Default

    Hello Chris, I would like to make a Stirling Engine large enough to turn a generator. By pressurizing and liquid cooling did you notice a big difference in efficiency? Do you have a site you would recommend for someone to buy plans for Stirling and Steam Engines? Thank You



  6. #6
    Member
    Join Date
    Dec 2007
    Location
    Australia
    Posts
    2148
    Downloads
    1
    Uploads
    0

    Default

    That engine is a thing of beauty Chris! Very well done mate. I love Stirling engines, and when time permits I'll be having a go myself, especially as the kids will be enthralled by it. Is this your own design or one of the classic ones?

    Also, do the tolerances need to be extremely tight, or is there a little room for minute innacuracy with these engines?

    cheers,
    Ian

    It's a state of mind!


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Stirling engine pressurized and water-cooled

Stirling engine pressurized and water-cooled