Hi,
that stepper has an built-in driver. With regular steppers the signal wires from the Masso go to the stepper driver an the four power wires go from the driver
to the stepper.
Craig
This might be a stupid question. I'm in the process of getting a parts list. I'm going with a Masso G3 controller and the Masso closed loop steppers. I'm looking at their wiring diagrams and it looks like they are wiring them directly to their controller. Is this correct? What about drivers?
Similar Threads:
Hi,
that stepper has an built-in driver. With regular steppers the signal wires from the Masso go to the stepper driver an the four power wires go from the driver
to the stepper.
Craig