Is this a good deal on a stepper driver?

[dazp1976]

Is this a good deal on a stepper driver for budget systems?.
These take up to 110vdc power supply.

I've found that nema 34 motors upto 1080oz/in are great with a 80vdc supply.
Nema 23/24 motors give a lot more velocity at higher voltages too. even with an inductance level up to 3.5mh.

https://www.aliexpress.com/item/33012198502.html?ug_edm_item_id=33012198502&edm_cl ick_module=item_detail&tracelog=rowan&rowan_id1=ae ug_edm_24687_1_en_US_2021-11-24&rowan_msg_id=2238biz_search_product:0:0_5439422 $4e7603f2eb04471c96e1332d2c8e2d1a&ck=in_edm_other

https://www.aliexpress.com/item/4000...58810697%22%7D

Similar Threads:

• What's a good 60v stepper driver?
• AXXB-E and good stepper driver for it
• Deal or No Deal? Stepper driver package.
• Need Help!- Help selecting a good driver for my stepper motors
• Stepper motor driver with good price

[dazp1976]

https://www.aliexpress.com/item/3301...c00iD6zL3&mp=1

[metalmayhem]

the leadshine ma840h is a decent driver and has been changed to ma840e . I don't know how much I'd trust them on ali . They aren't going to be leadshine but for the price you can't go too far wrong .

I recently bought some of these as backup . I haven't had a need to try them yet but everything else I've gotten from these guys has been good .

https://www.omc-stepperonline.com/sa...per-motor.html

[dazp1976]

the leadshine ma840h is a decent driver and has been changed to ma840e . I don't know how much I'd trust them on ali . They aren't going to be leadshine but for the price you can't go too far wrong .
I recently bought some of these as backup . I haven't had a need to try them yet but everything else I've gotten from these guys has been good .
https://www.omc-stepperonline.com/sa...per-motor.html

I have their DM860T version (110v) and works great on 80vdc with a nema34 1080oz/in.
The issue with St-online is you have to be careful when searching motors. They have some really bad spec ones.

[metalmayhem]

on the other hand they have some with really good specs , but I agree that a guy needs to be cautious in his choices . I replace my torus pro motors with some I got from them and the performance difference on the mill was incredible

[dazp1976]

on the other hand they have some with really good specs , but I agree that a guy needs to be cautious in his choices . I replace my torus pro motors with some I got from them and the performance difference on the mill was incredible

I've got an equivelent of these ones:
https://www.omc-stepperonline.com/ne...s39-4204d.html
At 3mh inductance they're not perfect but they reacted very well once I used 60vdc to drive them.

Now they have these ones:
https://www.omc-stepperonline.com/ne...m-4-wires.html


I'll go for AC servos next time.