Need Help! Determining correct wires from stepper motor


Results 1 to 2 of 2

Thread: Determining correct wires from stepper motor

  1. #1
    Member
    Join Date
    Mar 2016
    Location
    United States
    Posts
    46
    Downloads
    0
    Uploads
    0

    Default Determining correct wires from stepper motor

    Is it possible to determine the wires from stepper motor A+ A- and B+ B- using a multimeter ? If so HOW ! thanks

    Similar Threads:


  2. #2
    Member
    Join Date
    Nov 2013
    Posts
    4241
    Downloads
    0
    Uploads
    0

    Default Re: Determining correct wires from stepper motor

    Hi,
    there will be a low resistance, several Ohms or less between A+ and A-, and also between B+ and B-, but open circuit between any A and any B.

    As for the difference between + or -...who cares. Just wire it up and then swap just one winding if the stepper is going in the wrong direction.

    Craig



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Determining correct wires from stepper motor

Determining correct wires from stepper motor