How can I run Nema23 @ 2or3 rpm


Results 1 to 4 of 4

Thread: How can I run Nema23 @ 2or3 rpm

  1. #1
    Member
    Join Date
    Mar 2017
    Location
    Australia
    Posts
    7
    Downloads
    2
    Uploads
    0

    Default How can I run Nema23 @ 2or3 rpm

    I have a spare Nema 23 & M335 driver which I would like to be able to run at very low variable speeds for a non CNC project.
    Is there an easy way to achieve this? Potentiometer maybe? Or am I being naively hopeful.
    Thanks

    Similar Threads:


  2. #2
    Community Moderator Jim Dawson's Avatar
    Join Date
    Dec 2013
    Posts
    5717
    Downloads
    0
    Uploads
    0

    Default Re: How can I run Nema23 @ 2or3 rpm

    Jim Dawson
    Sandy, Oregon, USA


  3. #3
    Member CitizenOfDreams's Avatar
    Join Date
    Nov 2012
    Location
    USA
    Posts
    1267
    Downloads
    4
    Uploads
    0

    Default Re: How can I run Nema23 @ 2or3 rpm

    Here is another one that will work:

    https://www.ebay.com/itm/294216615395

    Problem is, these boards may have too wide of a speed range for you. At the lowest setting, the speed will change from 1.5RPM to 45RPM (80Hz to 2400Hz).



  4. #4
    Member
    Join Date
    Mar 2017
    Location
    Australia
    Posts
    7
    Downloads
    2
    Uploads
    0

    Default

    Thanks Jim



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

How can I run Nema23 @ 2or3 rpm

How can I run Nema23 @ 2or3 rpm