Help me wire my stepper motors to my Duet2 wifi please


Results 1 to 5 of 5

Thread: Help me wire my stepper motors to my Duet2 wifi please

  1. #1

    Default Help me wire my stepper motors to my Duet2 wifi please

    Hello guys.
    I have a Duet2 wifi board but I can't understand how to wire the motors 4pins.

    The Duet2 manual says :
    "On Duet 2 WiFi these are labelled '2B 2A 1A 1B' on the back of the board, and on the wiring diagram. The '1' and '2' refer to the coil or phase, the 'A' and 'B' refer to the positive and negative."

    https://d17kynu4zpq5hy.cloudfront.ne...sxMC5tRgt.huge

    My stepper motors label says :
    BlackA+
    GreenA-
    RedB+
    BlueB-

    Do you understand ?
    Thank you.

    Similar Threads:


  2. #2

    Default Re: Help me wire my stepper motors to my Duet2 wifi please

    Is it right to connect like this :
    2B = RedB+
    2A = BlueB-
    1A = BlackA+
    1B = GreenA-

    Thank you.



  3. #3
    Member CitizenOfDreams's Avatar
    Join Date
    Nov 2012
    Location
    USA
    Posts
    1069
    Downloads
    4
    Uploads
    0

    Default Re: Help me wire my stepper motors to my Duet2 wifi please

    2B=Blue B-
    2A=Red B+
    1A=Black A+
    1B=Green A-

    Your connection will work as well, but the direction of rotation will be reversed.



  4. #4

    Default Re: Help me wire my stepper motors to my Duet2 wifi please

    Thank you very much CitizenOfDreams you don't know what your help feels rights now.
    I'm depressed and I feel life is against me right now.

    Thank you, for a bit of light today.

    Edited to say, I have 2 Y (I think it's Y) motor on my workbee, should I connect the second Y motor to E0/drive3 or E1/Drive4 ?
    Or instead of the 2 Z drive ?

    Edited again, I found the answer for the duet and workbee here, if someone is interested :
    https://learn.ooznest.co.uk/Guide/6....+Controller/11

    Thank you again.

    Last edited by richieloro; 02-06-2021 at 02:36 PM.


  5. #5
    Member CitizenOfDreams's Avatar
    Join Date
    Nov 2012
    Location
    USA
    Posts
    1069
    Downloads
    4
    Uploads
    0

    Default Re: Help me wire my stepper motors to my Duet2 wifi please

    You are welcome, glad you got it figured out. Thanks for posting the answer, that might help someone else who has the same problem.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Help me wire my stepper motors to my Duet2 wifi please

Help me wire my stepper motors to my Duet2 wifi please

Help me wire my stepper motors to my Duet2 wifi please