Only movement in one direction on all 3 axes

[MicroJAB]

Need Help!
Just installed new driver to Y axis . Now I have movement in all three axes where I did not before .However when first jogged machine moves in y axis but only one direction(was not moving previous new driver) X was moving two directions Z didn't try. I did a few checks on connections all seemed to be good connection, and now I have only movement in one direction in all three axes. Anyone out there that can make anymore sense of that then me? It has mach3 and my control box is a 3040z Chinese box. I will attach a photo of original driver to the newly installed one.

Similar Threads:

• Need Help!- G28 moves Axes in wrong direction.
• g540 fault, no movement on z axis, other axes work fine
• Axes move wrong direction when homing. EZ TRAK DX II
• Unwanted axes movement.
• Axes run rough in one direction