Need Help! Stepper kit power supply question


Results 1 to 2 of 2

Thread: Stepper kit power supply question

  1. #1
    Member
    Join Date
    Feb 2012
    Location
    USA
    Posts
    117
    Downloads
    0
    Uploads
    0

    Default Stepper kit power supply question

    I purcheased a stepper kit from automation technologies, the link is below. It is 4- 5amp 570oz steppers, 4- KL-5056 5.6A 24-50VDC Stepper Motor Drivers, and a 48V/12.5A Power Supply. My question is-- Do I need another power supply to run this kit? I don't know much about this. I see several other companies sell kits that close in specs where the power supply doesn't have the amps for the motors. I am trying to upgrade from a hobbycnc chopper board, which has served me well but is getting moved to a different machine.
    Any help would be greatly appreciated. Hers a link to the kit I purchased. https://www.automationtechnologiesin...-4-axis-kit-1/

    Similar Threads:


  2. #2

    Default Re: Stepper kit power supply question

    You should be fine with that kit as is. It's a really good starting place anyways.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Stepper kit power supply question

Stepper kit power supply question

Stepper kit power supply question