Sanyo Denki contact or part number help


Results 1 to 2 of 2

Thread: Sanyo Denki contact or part number help

  1. #1
    Member SteveS's Avatar
    Join Date
    Oct 2004
    Location
    USA
    Posts
    167
    Downloads
    0
    Uploads
    0

    Default Sanyo Denki contact or part number help

    My CNC has a Nema 34 stepper for the Z axis from Sanyo Denki. The part number on the stepper is SH2861-5142.
    In the catalog there is a SH2861-5141, but the mH inductance is 3.7 which would be a crazy voltage.
    There is a SH2861-5241, but the current 6a instead of the 4a on the stepper.
    I can't find an email or tech support phone number to follow up on it.
    The CNC was built in late 2019.
    Anybody have a suggestion?

    Steve.

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Sanyo Denki contact or part number help-sanyomotion-sh2861-5142-jpg  


  2. #2
    Member
    Join Date
    May 2015
    Location
    Australia
    Posts
    507
    Downloads
    0
    Uploads
    0

    Default Re: Sanyo Denki contact or part number help

    The SH2861-5141 spec is here.
    https://products.sanyodenki.com/en/s...2/SH2861-5141/
    Sometimes the number might be for a slight variation (eg longer shaft or something)

    With a Sanyo Denki, I would not worry too much about inductance. Just give it a decent voltage and it will fly! I have some 2 amp 60 mm (NEMA 24) motors and they are amazing. They do 40 m/min rapids and 0.8 G acceleration on my machine. But I am feeding them 90 volts.

    Rod Webster
    www.vmn.com.au


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Sanyo Denki contact or part number help

Sanyo Denki contact or part number help

Sanyo Denki contact or part number help