Need Help! DM860H driver - is it worth buying?


Results 1 to 1 of 1

Thread: DM860H driver - is it worth buying?

  1. #1
    Member
    Join Date
    Jul 2016
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default DM860H driver - is it worth buying?

    Hello,
    I'm looking for a matching stepper motors driver for my motors.

    My stepper is Nema34 with the following parameters in the bipolar parallel connection:
    - 4,5 Nm of holding torque (about 637 oz-in)
    - 4,2 A per phase
    - 0,38 ohms per phase
    - 2,5 mH inductance per phase

    I've found out a DM860H chinese driver (which costs around 20$), that would match the motor's parameters. It has 7,2 A peak output current and max 110 V DC.
    https://www.cnczone.com/forums/attac...d=446990&stc=1

    Does anyone have any experience with these drivers? Is it worth a buying?

    Similar Threads:
    Attached Thumbnails Attached Thumbnails DM860H driver - is it worth buying?-dm860h-jpg  
    Last edited by xa19; 08-09-2020 at 05:24 AM. Reason: Typo in the thread title


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

DM860H driver - is it worth buying?

DM860H driver - is it worth buying?

DM860H driver - is it worth buying?