- New Machine Build- Stepper Motors with Woodpacker Camxtool v3.4 Cnc Control Boaard
-
Member
Stepper Motors with Woodpacker Camxtool v3.4 Cnc Control Boaard
Hi ,
i want to build a cnc machine for engarving and cutting wood plates .
i bought this control card first and stepper motors before constuct mechancic body of machine.
control card : https://www.aliexpress.com/item/4000163253874.html ( built in A4988 stepper driver chips)
stepper motors : https://circuit.rocks/image/cache/pr...-1024x1024.jpg
stepper motor connection cables : https://www.aliexpress.com/item/32811275446.html
Can you help me about wire orders or grbl config. Stepper motors don't respond and shake when i want to operate from controller.
Similar Threads:
Last edited by buraqenigma; 04-14-2020 at 08:46 AM.
-
- New Machine Build- Stepper Motors with Woodpacker Camxtool v3.4 Cnc Control Boaard
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules