Need Help! HELP HELP WE NEED HELP


Results 1 to 12 of 12

Thread: HELP HELP WE NEED HELP

  1. #1
    Member
    Join Date
    Jul 2013
    Posts
    230
    Downloads
    0
    Uploads
    0

    Default HELP HELP WE NEED HELP

    I’m trying to complete this CNC router for school.
    I teach boys (14-19) in lock up. I’ve promised them I can change their world if they let me.
    CNC routers have changed mine.
    I’ve wired the motors to the drivers correctly.
    I gave proper voltage in and out.
    I’m just paralyzed with fear in completing the wiring of the motors to the B.O.B.
    I’ve researched You Tube, but I can’t pull the trigger.
    Can you help me get this done?
    I know I’m close.


    Sent from my iPhone using Tapatalkhttps://uploads.tapatalk-cdn.com/202...9350f40df0.jpghttps://uploads.tapatalk-cdn.com/202...e5b06868f9.jpghttps://uploads.tapatalk-cdn.com/202...bac4746999.jpghttps://uploads.tapatalk-cdn.com/202...3a6f8365a0.jpghttps://uploads.tapatalk-cdn.com/202...b662e76b87.jpg

    Last edited by robwiacek; 02-14-2020 at 03:16 PM. Reason: Pictures here


  2. #2
    Member
    Join Date
    Apr 2010
    Location
    Canada
    Posts
    82
    Downloads
    0
    Uploads
    0

    Default Re: HELP HELP WE NEED HELP

    I think you mean wiring the drivers to the BOB, not the motors.

    You are close. The details you are missing are normally supplied with the drivers and you should look carefully at that documentation. You can find it here: https://www.automationtechnologiesin...oad.php?id=242



  3. #3
    Member
    Join Date
    Jul 2013
    Posts
    230
    Downloads
    0
    Uploads
    0

    Default Re: HELP HELP WE NEED HELP

    Yes
    I have this.
    Just little scared about doing the wrong thing.


    Sent from my iPhone using Tapatalk



  4. #4

    Default Re: HELP HELP WE NEED HELP

    Yeah I think your big power supply needs to be ran to your drivers and not through the BOB. I have only wired a setup once but it worked the BOB I used only used 5v but is different than yours for sure. What BOB is that? And what motors are you using?



  5. #5
    Member
    Join Date
    Jul 2013
    Posts
    230
    Downloads
    0
    Uploads
    0

    Default Re: HELP HELP WE NEED HELP

    The BOB is a Chinese one of course.
    6 Axis for Mach 3
    The motors I believe are bi-polar


    Sent from my iPhone using Tapatalk



  6. #6
    Member
    Join Date
    Apr 2010
    Location
    Canada
    Posts
    82
    Downloads
    0
    Uploads
    0

    Default Re: HELP HELP WE NEED HELP

    Those drivers have a built in power supply.



  7. #7
    Member ger21's Avatar
    Join Date
    Mar 2003
    Location
    Shelby Township
    Posts
    35538
    Downloads
    1
    Uploads
    0

    Default Re: HELP HELP WE NEED HELP

    Do you have any documentation on the breakout board? Not sure why you would have two power supplies wired to it? What voltage are those power supplies, and what terminals are they wired to??

    Gerry

    UCCNC 2017 Screenset
    [URL]http://www.thecncwoodworker.com/2017.html[/URL]

    Mach3 2010 Screenset
    [URL]http://www.thecncwoodworker.com/2010.html[/URL]

    JointCAM - CNC Dovetails & Box Joints
    [URL]http://www.g-forcecnc.com/jointcam.html[/URL]

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  8. #8
    Member
    Join Date
    Jul 2013
    Posts
    230
    Downloads
    0
    Uploads
    0

    Default Re: HELP HELP WE NEED HELP

    Ger21
    I’ll have to get back to you.
    Everything g us at school and I’ll be back in Tuesday
    Thank you for your interest in helping.


    Sent from my iPhone using Tapatalk



  9. #9
    Community Moderator wendtmk's Avatar
    Join Date
    Dec 2005
    Location
    USA
    Posts
    591
    Downloads
    0
    Uploads
    0

    Default Re: HELP HELP WE NEED HELP

    Have you contacted CNC Router Parts/Avid for tech support help on your CNC Router Parts/Avid machine?

    Mark



  10. #10
    Member
    Join Date
    Jul 2013
    Posts
    230
    Downloads
    0
    Uploads
    0

    Default Re: HELP HELP WE NEED HELP

    Never heard of it!
    So no.
    I’d like to check it out
    Thank you


    Sent from my iPhone using Tapatalk



  11. #11

    Default Re: HELP HELP WE NEED HELP

    Did not even notice those were ac drivers. That break out board is interesting for sure. I found this description for it on amazon and googled it 0 documentation but there is an instructable may be worth looking at as it had a pic I couldnt read on my phone.

    Keenso DIY CNC 6 Axis MACH3 USB CNC Motion Controller Card Interface Engraving Machine Interface Breakout Board



  12. #12
    Member
    Join Date
    Jul 2013
    Posts
    230
    Downloads
    0
    Uploads
    0

    Default Re: HELP HELP WE NEED HELP

    Thanks
    Another person in this conversation supplied the actual info.
    I’m going to print it out and try to follow it.
    I do appreciate your help.
    Thanks


    Sent from my iPhone using Tapatalk



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

HELP HELP WE NEED HELP

HELP HELP WE NEED HELP