Need a replacement stepper


Results 1 to 2 of 2

Thread: Need a replacement stepper

  1. #1
    Member Crutches's Avatar
    Join Date
    Nov 2019
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Need a replacement stepper

    I have a bridgeport mill I've acquired with an old cnc setup that I've updated a bit. I run it with mach4 through a pmdx-424 smart Bob. My z-axis motor is losing steps, and I think it's time to update these stepper motors. Can't find any good replacement based on the model tag of my current motor. (I'm a noob at this). Thanks.

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Need a replacement stepper-screenshot_20191120-071544_photos-jpg  


  2. #2
    Member
    Join Date
    Apr 2004
    Location
    Oakland CA USA
    Posts
    4918
    Downloads
    0
    Uploads
    0

    Default Re: Need a replacement stepper

    It's hardly ever the fault of the stepper motor itself. Try lowering the acceleration.

    Andrew Werby
    https://computersculpture.com/


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Need a replacement stepper

Need a replacement stepper

Need a replacement stepper