Reply with QuoteStepper motors are noisy, not much can be done about it. The only thing I found that helps a little bit is changing the coupler between the motor and the screw.
Plum couplings:
seem to transfer less noise than spiral cut couplings:
stepper motor is running noisy !
Hi friends
The stepper motors at mini cnc are running noisy.And the rpm does not exceed 250 mm / min.
Can you provide help for the solution.
System:
Similar Threads:
Re: stepper motor is running noisy !
Stepper motors are noisy, not much can be done about it. The only thing I found that helps a little bit is changing the coupler between the motor and the screw.
Plum couplings:
seem to transfer less noise than spiral cut couplings:
Re: stepper motor is running noisy !
Motor neden devir artm?yor acaba?
Re: stepper motor is running noisy !
Do a Search for setting up and tuning a Stepper motor.
1000x750 Workbee CNC - Mach4 - PMDX USB - Windows 10 Pro
Re: stepper motor is running noisy !
@wmgeorge yard?m için buray? seçtim umar?m.Burda o ki?i vard?r.
