3DM860 driver/controller question

[marbles]

Hi,
I bought a 3DM860 driver but didn't realise its a 3phase driver. Now that i'm looking at the description properly I see its clearly stated as 3ph.
My question is is there any way that can drive my 2ph 4 wire Nema 34 from it or am I limited to a servo or similar, I dont have at the mo?
Thanks

Similar Threads:

• New Machine Build- Arduino 2560 + Mach3 Controller + TB6560 4 Axis 3.5A Stepper Driver Board Controller
• Choosing a Driver/Controller
• Stand alone controller driver
• Driver controller and stepper help
• what controller with this Driver

[skrubol]

No way that will drive a 4-wire stepper. It won't drive a servo either, only a 3-phase stepper.

[marbles]

Hi,
I bought a 3DM860 driver but didn't realise its a 3phase driver. Now that i'm looking at the description properly I see its clearly stated as 3ph.
My question is is there any way that can drive my 2ph 4 wire Nema 34 from it or am I limited to a servo or similar, I dont have at the mo?
Thanks

Yeh totally agree. Just sent it back to China and bought a 2 phase instead. You live and learn eh!