Leadshine stepper drivers

[ericks]

Hi guys, i need some information please. I just purchased some Leadshine AM882H drives. Now i am confused by the information on the drive itself. I tried to find a pdf on the H model to make sure i can use it on a DC supply. The drive indicates VAC: 18-70 and VDC: 24V - 100V then at the connection strip it only indicates the two ac inputs??

Can anyone please confirm if these can be used with DC supply, and if so where would the Pos and Neg connection be made?

Thanks
Erick

Similar Threads:

• Need Help!- Trouble with Ruida 6442G and drivers Leadshine DM556
• LeadShine drivers recommendtion
• ! ESS Smoothstepper (LAN) with LEADSHINE DSP drivers
• Problem- ! ESS Smoothstepper (LAN) with LEADSHINE DSP drivers
• Is there anybody who used Leadshine's Closed-loop drivers and motors?

[john-100]

as the stepper driver indicates a supply voltage of
VAC: 18V - 70V or
VDC: 24V - 100V

you can connect the DC voltage either way round



John

[ericks]

Thanks John......much appreciated