Hello every one
I am new to here but need some help

Ok I have a Chinese 6040 CNC from Ebay and had some problems with the controller ( I let the magic smoke out of it ) when the pump sprung a leek. So I bought a CNC Kit 4 Axis Breakout Board Kit 4* TB6600HG Stepper Drivers from Ebay. Through a lot of T&E I got the CNC to move. But when i tryed to get limit switches to work I get no love from mach3. I have tryed with the switches normly open and normly closed. But each way every thing looks good in Mach3 untill I try to move a Axis then it trips a limit switch stop But no limit LED in mach3 Diag. is lit. knot sure what to try next



Have one to sell? Sell now

DIY CNC Kit 4 Axis New Breakout Board Kit 4* TB6600HG Stepper Driver Controller



Have one to sell? Sell now

DIY CNC Kit 4 Axis New Breakout Board Kit 4* TB6600HG Stepper Driver Controller



Similar Threads: