What do you mean by manual tool change?
There is an option to manual tool change on the general configuration page of uccnc.
Does anyone have a manual tool change version of the M6 macro? No sure what happened after the last update I did, but all of the M6 files I can find are all for the ATC.
Similar Threads:
What do you mean by manual tool change?
There is an option to manual tool change on the general configuration page of uccnc.
I'm looking for the plain vanilla M6 macro that comes with UCCNC. I did some beta testing for a friend and all of my M6 macros in the various profile folders were replaced by macros that are for those that have an ATC. Every time I start a job, it wants to go and retrieve tool #1 rather than just running the job. I'm having to delete the T1 M6 line in gcode after I post process a job.
Set UCCNC to ignore tool changes.
The default macro is attached.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)