(Q) In our SteelTailor portable CNC cutting machine which we buy in 2010 when cutting the x axis is cutting 4 mm bigger. Y axis is coming correct.
(A)
(1) Check the motor pulse value SETUP[F4]-----SYSYTEM[F2]------
NUMERATOR X: 769 Y:769
DENOMINATOR X:545 Y:545
(2) Go to “ LIBRARY “ select squireshape 500 * 500mm
(3) Set “KERF “ value as 00.00
(4) Fix a paper and a pen in placeof Test the machine and make the drawing on the chart paper
(5) Measure the dimensions checkthe on both axis.
(6) The practical way of setting is changing theNumerator value only,
For a 2 mm error changeNumerator value by 1 unit only for the axis which has error.
For example :
If after drawing you get Xaxis as 504 mm and y axis as 500mm
Set motor pulse as
NUMERATOR X: 767 Y:769
DENOMINATOR X:545 Y:545
Check if the pulse iscorrect by making another drawing. Keep changing only the numerator values to get correct value.
Similar Threads:
- Problem- Can we use CAMDUCT cutting software in SteelTailor portable CNC cutting machine?
- Problem- The second shape is not cutting correct with SteelTailor portable CNC cutting machine
- New Product- Year of portable Tube Cutting Machine Welcomes SteelTailor TubeTailor Cutting Machine
- Problem- Is there a cutting software for SteelTailor Power portable CNC cutting machine?
- Problem- How to change the cutting speed of SteelTailor portable CNC cutting machine
SteelTailor--The world leader of portable CNC cutting machine
www.steeltailor.com