Problem SteelTailor Plasma Nozzle is getting damaged at the first pierce itself?

Results 1 to 3 of 3

Thread: SteelTailor Plasma Nozzle is getting damaged at the first pierce itself?

  1. #1
    Registered
    Join Date
    Nov 2013
    Location
    Beijing China
    Posts
    171
    Downloads
    0
    Uploads
    0

    Smile SteelTailor Plasma Nozzle is getting damaged at the first pierce itself?

    Q)The Plasma Nozzle is getting damaged atthe first pierce itself, what could be the problem?

    A) First of all check if the plasma torch has all the required pats. Check if the O-ring or the swil ring isput correctly.

    SteelTailor Plasma Nozzle is getting damaged at the first pierce itself?-102942ps6s93w6orkicjyy-jpg



    More information about SteelTailor FAQs, Pls visit:
    Forum - Powered by Discuz!

    Similar Threads:
    SteelTailor--The world leader of portable CNC cutting machine
    www.steeltailor.com


  2. #2
    Moderator
    Join Date
    Jan 2008
    Location
    USA
    Posts
    2247
    Downloads
    0
    Uploads
    0

    Default Re: SteelTailor Plasma Nozzle is getting damaged at the first pierce itself?

    If the nozzle is getting damaged on the first pierce.....then you need to go back to the plasma cutter manufacturers operators manual and look in the mechanized cut charts. There you will find the specifications for piercing that include the recommended pierce height and the recommended pierce delay times. If your Steel Tailor machines has the ability to automatically set the pierce height and cut height....ensure that it is doing so accurately. Damaged nozzles during the pierce are caused by:

    1. Piercing too close to the material.
    2. Piercing without adequate pierce delay time.
    3. Piercing thicker than your plasma torch is designed for.
    4. Using incorrect consumables or power levels for the material and thickness being cut.

    Jim Colt Hypertherm



  3. #3
    Registered
    Join Date
    Nov 2013
    Location
    Beijing China
    Posts
    171
    Downloads
    0
    Uploads
    0

    Default Re: SteelTailor Plasma Nozzle is getting damaged at the first pierce itself?

    Quote Originally Posted by jimcolt View Post
    If the nozzle is getting damaged on the first pierce.....then you need to go back to the plasma cutter manufacturers operators manual and look in the mechanized cut charts. There you will find the specifications for piercing that include the recommended pierce height and the recommended pierce delay times. If your Steel Tailor machines has the ability to automatically set the pierce height and cut height....ensure that it is doing so accurately. Damaged nozzles during the pierce are caused by:

    1. Piercing too close to the material.
    2. Piercing without adequate pierce delay time.
    3. Piercing thicker than your plasma torch is designed for.
    4. Using incorrect consumables or power levels for the material and thickness being cut.

    Jim Colt Hypertherm
    Thank you for your kind explain. Nice day for you!

    SteelTailor--The world leader of portable CNC cutting machine
    www.steeltailor.com


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

SteelTailor Plasma Nozzle is getting damaged at the first pierce itself?

SteelTailor Plasma Nozzle is getting damaged at the first pierce itself?