1/4 scale Case Traction Engine

Results 1 to 4 of 4

Thread: 1/4 scale Case Traction Engine

  1. #1
    Registered
    Join Date
    Aug 2008
    Location
    United States
    Posts
    56
    Downloads
    0
    Uploads
    0

    Default 1/4 scale Case Traction Engine

    Does anyone happen to have an idea what a 1/4 scale Case Traction engine would sell for? The engine will fire and is well built. It was built about 35 years ago from Tom Terning's castings.

    Similar Threads:


  2. #2
    Registered
    Join Date
    Aug 2013
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default

    Go to EnginAds.com and look around. They pop up once in awhile on that board.



  3. #3
    Registered
    Join Date
    Aug 2008
    Location
    United States
    Posts
    56
    Downloads
    0
    Uploads
    0

    Default

    Thanks. I have checked that site out before. Nothing lately.



  4. #4
    Registered
    Join Date
    Nov 2011
    Location
    USA
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: 1/4 scale Case Traction Engine

    I picked mine up for $6500 about 2 years ago at auction.



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

1/4 scale Case Traction Engine

1/4 scale Case Traction Engine

1/4 scale Case Traction Engine