- HELP Please
-
Member
HELP Please
I am trying to machine a Helical Gear but i am struggling to get Sprutcam to do the job.
I have created the gear cutter form tool. The gear black will be mounted in a 4th axis at 20deg
The gear needs to rotate on the A axis while feeding in X and Y to cut the teeth with the side of the gear cutter.
I know this is possible and will be a really nice process when done but I just cant get it to program.
Any help much appreciated.
I have attached the Sprutcam file as well if it helps there are a few of my tries but no success.
Thanks Peter
-
-
Member
Re: HELP Please
-
Member
Re: HELP Please
I am trying to do this
But the 4th axis is mounted at 20 deg rather than the spindle
- HELP Please
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules