Need Help! YL620-H


Results 1 to 3 of 3

Thread: YL620-H

  1. #1
    Member 2418's Avatar
    Join Date
    Mar 2019
    Posts
    15
    Downloads
    0
    Uploads
    0

    Default YL620-H

    It's only a small detail, but I would still configure it correctly.
    I start/stop the VFD via DI1.
    However, the "run" LED never lights up.

    My parameter adjustments:

    P0-02: 1
    P0-03: 2
    P7-01: 0
    P7-02: 0

    Does anyone know which parameter I need to adjust?

    Similar Threads:


  2. #2
    Member 2418's Avatar
    Join Date
    Mar 2019
    Posts
    15
    Downloads
    0
    Uploads
    0

    Default Re: YL620-H

    Estlcam recommends 4N32 Optocoupler for on/off signal.
    But this type works not with YL620-H !
    Use 4N32 instead!



  3. #3
    Member 2418's Avatar
    Join Date
    Mar 2019
    Posts
    15
    Downloads
    0
    Uploads
    0

    Default Re: YL620-H

    Sorry. I mean: use 4N35 instead



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

YL620-H

YL620-H