Originally Posted by
riandavidson
Hello,
I would really appreciate any assistance on this as it's becoming quite difficult and out of my realm of expertise so please bare with my general lack of knowledge here.
Background: I ordered a belt grinder from a CNC manufacturer in Poland and everything looks good overall. It's wired as 3P+N+T. I've attached an image of the motor specs.
I've ordered a VFD (Brand: VEVOR A2) rated for 3 phase input at 380V with a 4KW capacity. More than enough to handle the 1.2kw motor of my belt grinder. I was just working with an electrician to wire it and we noticed that the VFD has no N terminal so we decided to stop for safety reasons. I've been looking for other options and all of the VFDs i've found that have an N terminal are only rated for 220v single phase input. The current VFD I have has the following terminal sequence R.S.T.(ground).P.B.U.V.W.
Am I missing something here? I've attached a few images to help clarify the issue. Is there a specific kind of VFD I need to order or will this function?
Thanks for your assistance.