Reply with QuoteDo you have the manual for the VFD Drive, that Breakout board may not be suitable?Originally Posted by Diae
Wiring and programming
Hi everyone
I have a vfd ( KEB F5)
i have some wiring on it i don't know what type of control (pic in attachmnts)
Now i would wire it with an nc studio controller board (pic in attachmnts) the board is jut an extension of db 15
Can any one help
Similar Threads:
- Video CNC 6040 - "Nowforever" VFD Programming / Wiring
- wiring check please. parallel wiring to maximum current to servo motors
- Another sPID, G540, and Mach wiring question for the wiring challenged..
- Xilog 3 Parametric Programming Offline Programming
- instruction parameter programming / macro programming
Re: Wiring and programming
Do you have the manual for the VFD Drive, that Breakout board may not be suitable?
Mactec54
Yes i have it
That what i think
Have you look at the manual?
That little board is for axis I/O from some kind of controller with db15 connection.
Or for pc db25 to db15 converter for a simple lathe machine etc.
Not for signals on a vfd.
Re: Wiring and programming
No, I don't have this model manual can you do a PDF File and post it here
Mactec54
