Need source for spindle cable

[Tristar500]

I've got a small VFD and spindle.

Japanese TAC spindle 200 volta 1.2 amps
Pacesetter VFD output 120 Hz (can supply up to 4 amps}

Looking for 4 conductor {1 for each of the 3 phases + ground. Needs to be shielded. {or so I'm told?, 120 Hz isn't all that high but better to be safe}

Searched Amazon with little luck.

Any ideas?

Thanks in advance!

Similar Threads:

• Motor/Stepper Cable Source
• Newbie- Shielded Cable Source
• Source for shielded cable?
• Spiral Cable source?

[mactec54]

I've got a small VFD and spindle.

Japanese TAC spindle 200 volta 1.2 amps
Pacesetter VFD output 120 Hz (can supply up to 4 amps}

Looking for 4 conductor {1 for each of the 3 phases + ground. Needs to be shielded. {or so I'm told?, 120 Hz isn't all that high but better to be safe}

Searched Amazon with little luck.

Any ideas?

Thanks in advance!

You will find the cable you need at IGUS which is one of the best manufactures of cable and shielded cable, any VFD Drive you use, the spindle to VFD need to have a Shielded cable, even if the motor is a standard 50/60Hz

CF6---------- will do what you need

Go direct to IGUS there are others that sell their cable, direct is best.