Help with VFD for manual lathe.


Results 1 to 3 of 3

Thread: Help with VFD for manual lathe.

  1. #1
    Member mmarmino's Avatar
    Join Date
    Jun 2019
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Help with VFD for manual lathe.

    Hello all
    I have an old Bradford lathe that I'm trying to power up with a Vivor 4kw vfd. I'm not sure of the settings to set in the vfd. Any help is greatly appreciated.

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Help with VFD for manual lathe.-20210912_120803-jpg   Help with VFD for manual lathe.-20210912_120638-jpg   Help with VFD for manual lathe.-screenshot_20210912-120909_amazon-shopping-jpg  


  2. #2
    Member mmarmino's Avatar
    Join Date
    Jun 2019
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: Help with VFD for manual lathe.

    Well disregard, got it figured out!



  3. #3
    Member
    Join Date
    Jan 2005
    Location
    USA
    Posts
    12948
    Downloads
    0
    Uploads
    0

    Default Re: Help with VFD for manual lathe.

    Quote Originally Posted by mmarmino View Post
    Well disregard, got it figured out!
    Most Parameters would be at Default for that motor, does it have a clutch, or is it direct drive.

    Mactec54


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Help with VFD for manual lathe.

Help with VFD for manual lathe.

Help with VFD for manual lathe.