Have to know more about the motor you are driving, what are your motor name plate spec's
i feel like im really close to get this spindle working i just need your help.
So i finally got my spindle moving yesterday threw vfd auto tune feature but i cant get it working threw mach 4 yet.
I attached notepad file of ALL vfd settings along with manual and ESS screenshots to try to make this easier.
i have also had success getting motors connected and working.
ESSMB3 - VFD
AG - GND
AO - AI1
NO3 - X1 was also on y101
in VFD settings P01.20 is analog read on the VFD when in mach 4 enter rpm spindle start i will get a voltage reading here.
so what i think is left is maybe how to start spindle and witch direction it goes. how to wire that up and just make sure VFD settings are correct because i think somethings on wrong setting now.
seeing spindle spin for first time in 1 year has brought new life to this project
Similar Threads:
Have to know more about the motor you are driving, what are your motor name plate spec's
Mactec54
i Currently have 400v 3 phase going to vfd or i guess this a says AC SERVO DRIVE. I know this for sure and i have 208 3 phase coming into the building. with Maddox auto transformer. vfd does say ready RDY.
here is some more info given by manufacturer.
yes they sold it together
380v
13kw motor
28amp
18000 rpm
600hz
bt40
also has a 4 on it witch i think means its 4 pole
yes i bit of more than i could chew with this project and before i new it it was big.
with no cnc or cam experience at the time i got frustrated
so bought tormach and im comfortable enough now with cnc and cam and how it works
so im back at it would like the build volume and see it finished and moving haha
You said you did an auto tune, that may not of been a good Idea as you need all these motor spec's and some others entered into the drive before you do an auto tune
So I will go through the manual to see what you need to first set in the drive this may take a little while
Mactec54
the manufacturer said they setup vfd to motor. i hired a guy to help me with this from upwork to help me with this setup but we ultimately determined that it wasnt working because i was supplying it 208 3 phase and it didnt have enough power. so project got put on hold for awhile. i just recently got 3 phase transformer hooked up and started trying going threw the manual again. and thats when i found auto tune and saw motor spin for fist time.
good point
that's true a 12 months ago manufacturer set it up. but they don't know how I'm driving so i figure some things would get changed
9 months ago i hired someone and they made some changes. i have the list of changes he told me to done. but in farness to him we ultimately figured out i was supplying wrong power to vfd witch was 208 3phase
a week ago i connected 400v 3 phase started trying settings again new pc nothing worked but i ran tune procedure and spindle would move by entering (P03.24 - 2) - (ENTER) spindle would buzz then spin up. when i try to do this now it doesn't do anything.
but the list shows where I'm at now
Here’s video