Need Help! Error E stop presset

Results 1 to 3 of 3

Thread: Error E stop presset

  1. #1

    Default Error E stop presset

    Please help.
    Router set up with Gecko 540, uc100 Huanjang vdf with 1.5 kW water-cooled spindle. Mach3 Version R3.043.062. Win 7.
    The router runs fine on all stepper motors. When the spindle starts, the machine runs for up to 6 sec. stops. Error message e-stop pressed.

    Similar Threads:

  2. #2
    Community Moderator Al_The_Man's Avatar
    Join Date
    Dec 2003

    Default Re: Error E stop presset

    Sounds like you have a lack of grounding in crucial areas, do you have a star point ground system set up for a start?
    Is your Spindle frame grounded?
    In some cases the 4 pin socket on the router is missing the ground wire from socket to frame making the ground conductor inefective.

    CNC, Mechatronics Integration and Custom Machine Design

    “Logic will get you from A to B. Imagination will take you everywhere.”
    Albert E.

  3. #3

    Default Re: Error E stop presset

    Problem solved. Frequency converter fault

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts


    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on

Our Brands

Error E stop presset

Error E stop presset

Error E stop presset