DIY Automatic tool changing router spindle system


Results 1 to 6 of 6

Thread: DIY Automatic tool changing router spindle system

  1. #1
    Member Chris D's Avatar
    Join Date
    Apr 2005
    Location
    USA
    Posts
    532
    Downloads
    0
    Uploads
    0

    Default DIY Automatic tool changing router spindle system

    Greetings all,

    The video linked below is a demonstration of my new tool changing system that I have created that works with an ER collet system like the Chinese spindles. In my case, it is an air cooled, 24,000 RPM, 2.2kW Chinese spindle. While not the fastest, it is reliable, accurate, and repeatable. Take a look to see what is possible.




    I plan to post additional videos about this project and will dive into a lot of the details in those videos.

    Cheers!

    Chris D

    Similar Threads:
    Last edited by difalkner; 05-23-2021 at 03:37 PM. Reason: removed duplicate video


  2. #2
    Member Chris D's Avatar
    Join Date
    Apr 2005
    Location
    USA
    Posts
    532
    Downloads
    0
    Uploads
    0

    Default Re: DIY Automatic tool changing router spindle system

    Greetings again,

    I just posted a new video explaining the Magazine component of the Automatic Tool Change System. Mechanical, electrical, Wizard settings, and Macro programs are explained. Take a look if you are curious about how this ATC works.



    The next video, which I hope to upload in about a week will cover the Tool Length Measuring sensor and the Part Height Measuring sensor and all the related details.

    Chris D.



  3. #3
    Member CitizenOfDreams's Avatar
    Join Date
    Nov 2012
    Location
    USA
    Posts
    1097
    Downloads
    4
    Uploads
    0

    Default Re: DIY Automatic tool changing router spindle system

    That's simply amazing, especially if it can work reliably in a real world environment (chips, dust, misalignment...). The only obvious drawback I see is that you need some additional tool stickout for the extraction mechanism.

    At 1:27 in the first video, the spindle makes several attempts to snap the nut into the socket. Would it make sense to rotate the socket 15 degrees after the first unsuccessful attempt?



  4. #4
    Member Chris D's Avatar
    Join Date
    Apr 2005
    Location
    USA
    Posts
    532
    Downloads
    0
    Uploads
    0

    Default Re: DIY Automatic tool changing router spindle system

    Quote Originally Posted by CitizenOfDreams View Post
    That's simply amazing, especially if it can work reliably in a real world environment (chips, dust, misalignment...). The only obvious drawback I see is that you need some additional tool stickout for the extraction mechanism.

    At 1:27 in the first video, the spindle makes several attempts to snap the nut into the socket. Would it make sense to rotate the socket 15 degrees after the first unsuccessful attempt?
    Thank you for the kind words! Much appreciated.

    There are two different phases that I have to index the socket to rotate either the collet nut, or, the collet nut & spindle. In both cases I have started with larger increments and worked my way down to the current angular step.

    My ultimate goal is to get 100% reliability which I have achieved once I switched to the Centroid / Acorn controller and a LOT of tweaking on the macro programs and hardware. After the system proves its reliability, I plan to do some tweaking in the macros to further optimize the system. I don't expect to get much "wasted time" out of it, but you know how things are in our world - every second counts.

    Thanks again for checking out the video. I have about 4 more planned in the coming weeks that explain different aspects of this system. Being that I really like the Centroid / Acorn controller, I may also do some more videos covering the control too.

    Chris D



  5. #5
    Member Chris D's Avatar
    Join Date
    Apr 2005
    Location
    USA
    Posts
    532
    Downloads
    0
    Uploads
    0

    Default Re: DIY Automatic tool changing router spindle system

    The next video in the series of this Automatic Tool Changing System is now up on YouTube. This video details the tool length measuring and the part height measuring.



    Chris D



  6. #6
    Member Chris D's Avatar
    Join Date
    Apr 2005
    Location
    USA
    Posts
    532
    Downloads
    0
    Uploads
    0

    Default Re: DIY Automatic tool changing router spindle system

    Here is a link to the next in the series covering the Automatic Tool Change System. In this video, the mechanical components and design of the tightening / loosing actuator are covered. In a few weeks, I will be posting the information about the electronics and code to make it work.



    Chris D



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

DIY Automatic tool changing router spindle system

DIY Automatic tool changing router spindle system

DIY Automatic tool changing router spindle system