Single Phase Motor on AT2-1500X

[oliverfink]

Hello,

I bought a VFD for my current setup.
The Spindlemotor is a single-Phase 1100W Motor.
The VFD is a Chinese Build VFD called AT2-1500X (built for Single Phase Input and Output)

I connected the Motor to the VFD - set all parameters on the VFD - but if I start the Motor it only goes back and forth for about 1/4 revolution ....

Could someone please help?

Thank a lot in advance...

Greetings
Oliver

Similar Threads:

• Need Help!- 220V single phase VFD 3 phase output for powering a 200V 3phase AC Servo drive/motor
• driving a single phase capacitor start/run motor from three phase vfd or power grid.
• Rewiring the coil of a single phase motor as 3 phase
• Need Help!- how to connect single phase spindle motor with 3 phase inverter
• fitting a 110v or 220v single phase spindle motor on a 3 phase machine