All things being equal between spindle motors, I would extend the acceleration ramp up time in the parameters.
I didn't use my machine for 6 months when I tried to power the spindle up it blows the fuses in my plugs
So I disconnected the spindle and VFD powers on OK
So I bought a new spindle 2.2kw same rating 220v as the old spindle had to change the plug on it as new spindle was and checked the continuity on everything and now I get this error code
any ideas what could be wrong?
Similar Threads:
All things being equal between spindle motors, I would extend the acceleration ramp up time in the parameters.
Same as MARV.
Wondering if all the settings have gone back to default after being off so long.
So I checked and I have a D223B what do I actually do to change these settings?
And are these the settings I need to change to change the Ramp up?
And what should I change them to?
Attachment 462763
Maybe these setting's are the ones?
What are sensible settings?