- Problem- VFD Huayang EER.N error code
-
Member
VFD Huayang EER.N error code
Model HY02D211B 110v driving 2.2KW spindle
Error Codes:
177 ELU.N
178 EER.N
179 EER.N
180 EER.N
Manual lists as "External Interference".
Any suggestions will be appreciated.
Question:
Any suggestions?
Does the error code reset on restart?
Perhaps I have to change the 110v AC supply cable to a shielded cable?
Other:
The spindle drive cable is 2 feet and is 16 gauge, 4 conductor, shielded with both ends grounded.
I also grounded pin 4 of the spindle drive to the spindle body and checked continuity to table ground and input power ground.
I tried setting PD041 from default 8 to 5,2,1, and finally 0 with no effect.
The error code appears without ever starting the spindle.
I used this and other helpful links to set the VFD settings and wiring:
https://www.hobbytronics.co.za/Conte...e_Settings.pdf
Ref: https://community.carbide3d.com/t/vf...-model/15459/7
https://www.cnczone.com/forums/spind...rror-eoca.html
Similar Threads:
-
-
Member
Re: VFD Huayang EER.N error code
Edit: Never mind, I was thinking of a different error code.
- Problem- VFD Huayang EER.N error code
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules