What motion (CNC) system is it running?
How is it programmed G.M. code etc?
You should be able to move the axis regardless of the spindle via a MDI move.
Al.
I am new to using a CNC. I have a CNCEST 6040, 4 axis, 1.5kw spindle. I reprogrammed the VFD values. Now the spindle will spin, but it is not moving on any of the axis. It doesn't matter if I'm using manual or computer. As I said I am new to this, Any and all help is appreciated.
Similar Threads:
What motion (CNC) system is it running?
How is it programmed G.M. code etc?
You should be able to move the axis regardless of the spindle via a MDI move.
Al.
CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
Does it move if the spindle and VFD are turned off?
[FONT=Verdana]Andrew Werby[/FONT]
[URL="http://www.computersculpture.com/"]Website[/URL]