Huanyang GT VFD 2.2kw how connect between NOVUSUN NVEM v2

[Mujicok]

Hello everyone, please help me. I have connected VFD GT 2.2kw between NOVUSUN NVEM v2 + mach 3 controller.
But I am having a problem I cannot adjust the spindle speed for match3. When enabled through match 3, the speed increases to the maximum. Help how to connect correctly

Similar Threads:

• Need Help!- Help with Novusun NVEM control card
• Need Help!- NVEM V2 connect to AC SERVO DRIVER AASD-15A-V6.3
• New Machine Build- Nvem v2 contoller...can I connect 2 encodre for X and Z axis ???
• Need Help!- Help with Novusun NVEM USB control card

[mactec54]

Hello everyone, please help me. I have connected VFD GT 2.2kw between NOVUSUN NVEM v2 + mach 3 controller.
But I am having a problem I cannot adjust the spindle speed for match3. When enabled through match 3, the speed increases to the maximum. Help how to connect correctly

First you have to see if the 0-10v Analog is working from the Novusun output you can test this in MDI M3S6000 and check the output voltage with a meter, use different RPM settings to see if the voltage changes 12000 should be around 5v one yyou have this part working then you can move to the VFD Drive

[Mujicok]

thank you very much for your respond. I appreciate, you are the only who responded to my request. I just started CNC working. Could you please send me a photo how to connect NOVUSUN NVEM v2 with VFD GT . I ve been trying to find any info in internet about VFD GT connecting. I m a Russian speaker and it gets the job more difficult. MDI M3S6000 What is this, could you explain please.