VFD PLUGIN FOR GT-7R5G-2 WITH UCCNC

[andyjack38]

HI. wondering if there is a modbusez plugin to control my VFD model Huanyang GT-7R5G-2 .Thank you

[Al_The_Man]

There is one for Mach3 I know, I have obtained quite a bit of info from Sebastien at Mach3 plugin for Huanyang VFD | Le royaume d'éole
To use it on another application.
For UCCNC you may have to write your own.
Unfortunately Huanyang do not follow the normal Modbus protocol.
Al.

[andyjack38]

DOES ANYBO0DY READ ANYMORE THE gt seris is fully modbus compliant plz read the manual of the gt series

[Formantjim]

Woah there! You ask a question and expect people to go out and download the manual and read it! Tsk Tsk.

To answer your question I use a Huanyang VFD via modbus with UCCNC and it works flawlessly. If you go over to the UCCNC forum you will find a plugin there that should get you up and running. As Al_The_Man says Huanyang do not follow standard Modbus commands so the current plugin may not have all the extra commands available for your VFD but on off, speed forward and reverse should work. (I did in fact I did indeed download your manual but it is not complete and it looks similar to mine).

[andyjack38]

HI,when i say read the manual, I mean read the manual of the GT-series not the old HY02D223B which is not modbus compliant. When you say you use Huanyang with modbus and it work flawlessly are you talking Huanyang model HY02D223B. What I am searching is if there is a Modbus plugin for a Huanyang model GT-7R5G-2. I am not trying to be impolite i just want to be clearin my asking, to all you poeples best regards