Wrong pictures are pretty common for chinese stuff.
You should get what's in the description.
I want to buy a VFD (Huanyang HY02D223B for preference) so I can connect to a Gecko G540. So far, each supplier I have checked out shows the 2.2 Kw model but then when I enlarge the image, the model number on the side of the machine equates to a 1.5Kw. Are they simply using the wrong image in their adds? Or is there another reasonably priced VFD that will do the job?
Tree
Wrong pictures are pretty common for chinese stuff.
You should get what's in the description.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Thank you. Will go ahead and buy.
Here is a G540 hook up.
https://www.cnczone.com/forums/spind...equipment.html
Al
CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.