VFD wireing for Acorn board


Results 1 to 2 of 2

Thread: VFD wireing for Acorn board

  1. #1
    Member
    Join Date
    Jan 2015
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default VFD wireing for Acorn board

    I need to know if I need to connect the FWD and common terminal to my acorn board of just the V I and ACM terminals in My VFD

    Similar Threads:


  2. #2
    Member
    Join Date
    Jan 2005
    Location
    USA
    Posts
    11194
    Downloads
    0
    Uploads
    0

    Default Re: VFD wireing for Acorn board

    Quote Originally Posted by Pa45 View Post
    I need to know if I need to connect the FWD and common terminal to my acorn board of just the V I and ACM terminals in My VFD
    Depending on the VFD Drive you are using as to how it is connected but normally you would use one of the Acorn relays to turn it On / Off FWD and DCM connection VI and ACM is only for your speed control

    Mactec54


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

VFD wireing for Acorn board

VFD wireing for Acorn board

VFD wireing for Acorn board