Hi mac thanks for your help.
That's what I was thinking too at first but my spindle says 6 amps on it and I found the same info online.
PD023 = 1 (0 is reverse rotation disabled)
I followed the wires to the VFD and made sure the pin #s and U,V,W matched and I got CCW rotation. That's when I swapped 2 of them to get it to go CW. Only problem now is that there is an intermittent screeching going on something like the bearings I guess but it comes and goes.
If all else fails I'll give up trying to run it in both directions... I just thought if it's capable of doing it, I want it set up