Reply with QuoteMost chinese boards do not support probing properly, and won't work with most auto zero macros.
Auto Zero wont set on top of material
Hello all,
After purchasing the NVUM USB breakout board and configuring it out, I am trying to use the auto zero tool and the machine touch the plate stops and stars to goes up to Z1. like is set up in the script, but it continues the travel past the Z1. once it stop, my Z still not zeroed and after many attempts of trying still not working.
please help...
Similar Threads:
- Auto labeling and auto feeding CNC machine for wood panel cabinet furniture
- Need Help!- Cincinnati 6R, OD, 24" whl, full auto cycle, BTW auto wheel dress
- Problem- mazak VTC20B M+ - tool magazine wont turn on auto or manual
- Problem- HPR130. THC will not auto adjust to material height.
- MAZATROL CAM M2 wont run on auto HELP!!
Re: Auto Zero wont set on top of material
Most chinese boards do not support probing properly, and won't work with most auto zero macros.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Re: Auto Zero wont set on top of material
what would be my best choice to set a plate so my z is zero
