Need Help! 800W Spindle Ground


Results 1 to 2 of 2

Thread: 800W Spindle Ground

  1. #1
    Member twbaisch's Avatar
    Join Date
    Jun 2019
    Location
    Oceanside, CA
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default 800W Spindle Ground

    Looking for best practice for attaching ground (Pin 4) to body of a 800W air-cooled spindle. Anyone who has a similar one and a good method, I'd appreciate it. Thanks.

    800W Spindle Ground-img_2225-jpg800W Spindle Ground-img_2227-jpg

    Similar Threads:


  2. #2
    Member
    Join Date
    Jan 2005
    Location
    USA
    Posts
    10749
    Downloads
    0
    Uploads
    0

    Default Re: 800W Spindle Ground

    Quote Originally Posted by twbaisch View Post
    Looking for best practice for attaching ground (Pin 4) to body of a 800W air-cooled spindle. Anyone who has a similar one and a good method, I'd appreciate it. Thanks.

    800W Spindle Ground-img_2225-jpg800W Spindle Ground-img_2227-jpg
    Where the cap attaches use a crimp terminal ,with a longer piece of threaded screw and nut, nut and lock washer will lock the Terminal to the spindle body, then remove just enough plastic from the cover to clear the terminal lock washer and nut, then use a nut on top to hold it in place

    Mactec54


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

800W Spindle Ground

800W Spindle Ground

800W Spindle Ground