Originally Posted by JohnTC I have contacted the makers first before posting and they haven't got back to me Cn-45 parameter looks to be for encoder counts per revolution, I maybe wrong still learning Which you don't have to set so leave it at the default CN-45=0.0 and you should be set
Mactec54
Originally Posted by mactec54 Which you don't have to set so leave it at the default CN-45=0.0 and you should be set This is the correct as a Snip right out of the PDF as you can clearly see the default is 0.1 not 0.0
1000x750 Workbee CNC - Mach4 - PMDX USB - Windows 10 Pro
To the op.... If you still need assistance then i will be available later to help you... But you need to be with your drive so we can go through the settings
View Tag Cloud
Forum Rules