- Newbie- First time Spindle owner - water cooled - have some questions
-
Member
First time Spindle owner - water cooled - have some questions
Good Morning everyone,
I am excited that I finally ordered a spindle. I ordered on Amazon as a kit. It is a 2.2KW Water cooled.
I went with water cooled as I want to cut alum with more precision and cut down on the noise and blown air from an air cooled type.
I understand that I need water. How much water does a spindle need? Is it 1 gal? or 5 gal? or 10 gal?
I read some thread where folks are using coolant? Is distilled water not good enough for casual use?
Last but not least, what is the deal with the food grade hoses I keep reading about? The kit I have comes with some "cheap" hoses. The machine is kept in an AC or climate controlled environment (not in a garage or shop with no AC).
This is the kit I ordered for your reference.
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
Thank you
Similar Threads:
-
- Newbie- First time Spindle owner - water cooled - have some questions
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules