Delta vfd settings

[ericks]

I will start sending you what i think you should set and we will see how it goes....but please disconnect the motor cables

[ericks]

Some of the settings may be changed later....
1) 00-09 = 00
2) 01-00 = 400
3) 01-01 = 400
4) 01-02 = 380
5) 01-05 = 0.......for testing, we will change it later before we connect the motor
6)

[ericks]

oops...i seem to have lost my last post with more parameters

[ericks]

I am going to make a spreadsheet with the parameters

[ericks]

I might have missed a few but i think i got most of the important ones...

[mactec54]

Something wrong can't post Parameter list that you need to this thread PM me your email if the PM is working for you and I will send you what you need

[Deluk]

I might have missed a few but i think i got most of the important ones...

Hello, sory for late replay,had some healt ishues. Thank you for the parameters i will try it first thing in the morning and hope it will work.

[ericks]

Hello, sory for late replay,had some healt ishues. Thank you for the parameters i will try it first thing in the morning and hope it will work.

Hi....sorry to hear about your health issues, hope you feeling better

[IN-WondeR]

I might have missed a few but i think i got most of the important ones...

I have a Delta VFD-B VFD on my little green thing in the shop, Is autotune a good idea, or can it do more harm than good?

And if it does good, is there a specific way to do it?

[mactec54]

I have a Delta VFD-B VFD on my little green thing in the shop, Is autotune a good idea, or can it do more harm than good?

And if it does good, is there a specific way to do it?

You need all the main Parameters set for your Motor / Spindle before you can use auto tune or it will be messed up and have wrong settings